Wet Rooms

Good quality product and good value....BUT, you need to purchase reducer TSG1-REDUCER to reduce down to 40mm. The waste outlet is non standard; 50mm compression or 50mm solvent fitting will not fit.

David Mackintosh from Newark

This does the job well in my new wet room. Instructions were easy to follow.

Joe from Harborne

I purchased this tray former kit for a shower room I was building. In general it is good for a budget tray. I had to trim it down a fraction to fit my needs but this was easily done. The tray has been installed and tiled over with no problems at all. Negatives - I'm not sure I'd consider this a complete kit. It only comes with enough tape and sealing gum to seal the edges of the tray and not the upright corners of the enclosure I created. I ended up buying another tanking kit with more tape and gum to fully tank my enclosure. - The waste supplied is pretty good, however I wanted to use 50mm waste pipe and the adapter supplied to convert the waste to 50mm was a very loose fit. Just make sure you use plenty of solvent weld and test it before you cover it all up. Mine worked out just fine. Overall this isn't a bad budget tray, it installed well and I'm happy with it. However, given how expensive everything else for the shower room has been I can't help wonder if I should have spent a little more.

Martin Binney from Bedford

Came on time and did the job superbly.

Mark from TONBRIDGE- verified purchaser