900mm Quadrant Shower Enclosures

It looks really good in the bathroom and assembled well

Waqas Qaimkhani from - verified purchaser

Note that the max dimensions are 880. This gives approximately 1 - 1.5 cm tray edge outside the shower, This is also apparent from the preformed curve of the threshold bar. Note also that the dimensions diagram shows the doors hanging inside of the tray edge however the fitting instructions and bottom door seals require the doors to be on the edge, that is, not overhanging into the recesses part where the water runs. The seal only works if the edge is wide enough. Ours is fitted to nearly the max 880 size but the tray edge is not wide enough to accommodate the doors so the seal is on the inside of the edge. This means that water can splash under the seal and over the threshold edge. A different seal will help and a redesign to reduce the spacers and door guide to push the doors out further but I guess as it stands there will be many trays that are not suitable so be careful. Our tray edge that the 5cm and I think 6.5cm would be the minimum for the supplied seal to work. I can't fault the enclosure at all it lovely but I didn't realise (and it isn't mentioned anywhere) that there is a minimum tray edge requirement for the enclosure to fit on for it to he water tight. Obviously I didn't spot that failure until I fitted the doors by which time it's too late, so for that I'm really disappointed and will have to use a different seal or extend the edge/threshold in some way.

Keitih from Romsey

Quick delivery , well packaged, item fits perfectly and easy to fit , looks much better than previous ones .value for money .

Dalbeir Singh from - verified purchaser

My only problem now is the door needs new seals all round it and I can not find out how or if I can purchase them.

Jim McCreadie from Colchester Essex