Rectangle Shower Enclosures

I've said it all in the title really - parts seem quality but boy do those instructions leave a lot to be desired!! For the smaller width of a 800mm shower tray ensure you do not put the wall bracket too far over towards the outer edge as the shower door overhead fixings will not reach! (This is even with the extension parts attached). Make sure to put the wall bracket at least an inch away from the outer edge... nowhere in the very basic instructions does it advise this or the dimensions you should use. Also very small pics in instructions are hard to figure out. Deducted a star across the board for this as wasted many more hours than needed deciphering the poor instructions - they need redoing.

Very happy. Took me a whole day to fit. Not very difficult but the instruction booklet was nightmare but somehow managed to install successful at the end of the day, very nice looking shower enclosure, plenty of space and comfortable for the family.

The shower tray feet have to be screwed in using self tapping screws. The instructions regarding location are vague, and as a result it is possible to drill through the shower tray if you're not careful. The shower enclosure is provided with less precise and very unclear instructions. Part identification is the main problem and is pretty impossible without 5 or 6 hours of time to play with.Also, the fast flow trap is prone to airlocks. I often have to remove the chrome face plate for the water to drain away. You may want to look at an alternative. So all in all, disappointing, but good value if you have a lot of time on your hands, a lot of patience, and are prepared to accept the flaws of what could otherwise be a really good product. Would I buy it again? Yes probably.