Mira Shower Doors & Enclosures

Great shower door which I used in a shower room. Seems strong and well made. I would recommend it.

Richard- verified purchaser

Excellent product If there was anything negative to comment would only me that we had to wait slightly longer than anticipated

Lesley Stewart from - verified purchaser

The product was OK but the installation instructions were of little use. One cannot actually install the unit as documented for any opening close to 980mm wide, It would work for 1000mm wide openings. The need is to mark out, drill the walls and fix the side channels, then take them off again and slot them over the sides of the main frame, place the frame and side channels in position and screw the side channels partly in. You cannot use the screws supplied as they are not long enough to work through the frame as the drop off down the channels before one can get them into the wall plugs. Then you can actually apply the silicon down the back of the channels and screw the channels in position. The installation of the sliding door was an issue as well as the wheel supports seem to have changed from those documented. The magnetic strip to the frame that keeps the door closed would pop out so I had to apply some contact glue to keep it in position.

James Greenan from Perthshire- verified purchaser

Bought for an already installed shower. This designed to fit the Mira shower. I needed to use some of my diy skills to adjust the hinges slightly to fit my existing shower. Fits fine and works as expected. Excellent VFM

David Ramanaden from Cheshire- verified purchaser