Mira Leap Bi-Fold Shower Door 760mm

Installed by two eighty year olds - easily followed instruction, resulting in a real professional looking job . Would recommend with confidence.

Made my rebuild very fine just what is needed to complete the finish of my project

Just fitted the Mira screen into an on-suite alcove. This is clearly a quality product and far better than the screen fitted by the developer of our house. This is only the second shower screen I have fitted so relatively new to this although competent at DIY. For those in a similar position to me (not relevant to the experts) my comments are as follows. The thicker glass does make the screen quite heavy but my wife and I managed it upstairs OK. The instructions are written on the basis the shower is being fitted with a side which initially made me think I’d bought the wrong screen. But it is also intended for alcoves. I had to place the screen in position with the side supports in place ie I had to use the screw access holes to screw the frame to the walls. This means getting a screw through the frame void and connect to the pre-prepared hole in the wall. I struggled with masking tape holding the screw to the driver and it was really difficult. It wasn’t till I’d finished that my wife asked me what ‘the little tube is for’. The penny dropped - that gets the screw through the void. No mention of this in the instructions! So, great shower screen, but don’t loose the little tube!1