Grab Up To 60% Off In Our February Sale!
Plus an extra 10% off our Arezzo range with code AREZZO10. Code ends in:
Genesis 10mm Grey PVC Round Edge Regular Tile Trim
Part No:ETR108.11
£15.86
Available Estimated delivery time: 2 - 7 days
Notify me
Configure Your Product
Colour:
GreyHeight:
10 mmDelivery OptionsAdd postcode to view all options
Delivery & Returns FAQs
Product Information
Genesis 10mm Grey PVC Round Edge Regular Tile Trim - ETR108.11
The Genesis PVC Round Edge Regular Tile Trim features a smart quadrant face which is good for three dimensional alignment, overhang lips to better butt against the cushion edge of the ceramic tile, and a second upright to support the face making it the most suitable trim for floor tile use.
Product Details
Installation:
1. Select ETR according to tile thickness.
2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
3. Press the perforated anchoring leg of the ETR into the tile adhesive and align, mechanically fix if required.
4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower.
6. Fill the joint completely with grout.
The Genesis PVC Round Edge Regular Tile Trim features a smart quadrant face which is good for three dimensional alignment, overhang lips to better butt against the cushion edge of the ceramic tile, and a second upright to support the face making it the most suitable trim for floor tile use.
Product Details
- Material: PVC
- Finish: Grey
- Length: 2.5m
- Height: 10mm
Installation:
1. Select ETR according to tile thickness.
2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
3. Press the perforated anchoring leg of the ETR into the tile adhesive and align, mechanically fix if required.
4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile, the profile should not be higher than the tiled surface, but rather up to approximately 1 mm lower.
6. Fill the joint completely with grout.
No reviews about this product yet
How We Gather Reviews
No questions about this product yet
Current Item
Genesis 10mm Grey PVC Round Edge Regular Tile Trim
£15.86
Available