AQUAS Indulge Touch Flex Smart 9.5KW Matte Black Electric Shower

Enjoy an extra vigorous shower and choose from three spray options with the AQUAS Indulge Touch Flex Smart Shower. This matt black 9.5kw electric shower comes with a powerful handset on a flexible hose, as well as a wide overhead shower. Operate one or both of the options via the elegant control panel featuring illuminated touch sensors alongside a digital temperature display. The shower's superior sensor technology optimises pressure for a luxurious experience. Future focused AQUAS showers help you reduce your energy consumption too, as they come with an eco setting for the milder seasons.

• Range: INDULGE Touch Flex
• Name: Indulge Touch Flex Smart
• Colour: Matte Black 
• Includes Handshower, overhead shower and slidebar
• Distance rail bracket adjustable
• Smooth black hose 1,5m 1/2" x  1/2" twistfree non conductive
• Shower arm 400mm with free fixation
• Spray force - increased spray force for sensational showering experience 
• Zero hole - fullcover spray pattern
• Power Rating: 9.5kw
• A Min Dynamic flow pressure of 100 K /Pa ( 15 ib / Sq In ) - 1.0 BAR  is required
• A Max Static  pressure of 500 K /Pa ( 75 ib / Sq In ) - 5.0 BAR  should not be exceeded
• Advantages:
• Fiber reinforced  Tank - less limescale, extended life, energy efficient, burst resistant
• Controls:
• Start/Stop button
• Easy Grip - temperature control
• Three-way ceramic divertor to switch between Overhead and Handshower
• Shower Fittings:
• Integrated rail in electric shower 600mm with free fixation and front load slider
• Distance between rail brackets adjustable
• all chrome unless otherwise indicated
• Ceramic diverter
• Overhead shower 200mm with air technology
• Showerarm 300mm
• Handshower 100mm diameter, 3 spray pattern: rain, massage, mix air technology
• Rub clean nozzles
• Installation:
• Electrical connection
• Water entry points right - top, bottom, back
• All indulge and AQUAMAX models have a water connection that is suitable for a "right" only water supply connection.
• The water connection pipe is not reversible.
• Use standard UK plumbing connections - compression - Push fit.
• Cable entry points left hand side - top, bottom, back : right hand side - top, bottom, back
• Outlet connection 1/2" compression and pushfit 1/2"
• Power Input: 
• A Power Input of 240 V and 40 amp circuit breaker is required for max output ( 9.5 KW ) anything less and the heater will not operate at max efficiency
• Approvals: BEAB, CE; ROHS
• Safety:
• Thermal protection: Overheating indication if temperature exceeds 47°C -  automatic reduction of power mode
• Low pressure sensor – automatic reduction of power .  
• If flow drops immediately – shower will reduce power mode to lower level
• Outlet temperature sensor reports back to CPU temperature and would reduce power mode
• Cold start technology – when closing the shower, the temperature display will countdown 6 seconds to final closure of the water. Cold water keeps running during this period to cool down heating coil and prevent scalding in case of an immediate restart
• ELECTRICITY LEAKAGE – SAFETY FEATURE 
• If the event of any electrical leakage above 15 M/ Amps , the heater will automatically close down for maximum safety