*GET AN EXTRA 10% OFF SHOWERS WITH CODE: SHOWERS10

**FREE DELIVERY TO MOST OF THE UK ON ORDERS OVER £499

Ultra Traditional Twin Exposed Thermostatic Shower Valve - Chrome - AG302 Large Image
Ultra Traditional Twin Exposed Thermostatic Shower Valve - Chrome - AG302 Large Image

Nuie Traditional Twin Exposed Thermostatic Shower Valve - Chrome

Part No.: AG302

£159.95

|

In Stock

Overview

Nuie Traditional Twin Exposed Thermostatic Shower Valve - Chrome - AG302

The traditional chrome twin exposed thermostatic shower valve from Nuie. The Traditional twin thermostatic shower valve is robust and graceful and it's strength of design is equaled by the depth of choice of shower heads & kits. Suitable for all types of plumbing installation this shower valve has the added safety benefit of a built in anti scald device should the cold water supply fail.

Traditional shower valves give a timeless elegance to any bathroom. The charm of yesteryear is recreated in the shower valve heads. A must for those wishing to make a classical bathroom statement.

Operates one shower accessory: fixed head or rigid riser kit (sold separately).

Product Details
  • Height: 175mm
  • Depth: 140mm
  • High Quality Design
  • Finish - Polished Chrome
  • Material - Heavyweight Brass Construction
  • Product Code: AG302
  • Manufactured to the Highest Standards
  • Suitable for gravity-fed, combi boiler, and unvented mains pressure systems
  • White Ceramic handle
  • Smooth Operation with Quality Components
  • Built-In Anti-Scald device
  • Water Pressure - LP1 - 0.1 bar pressure minimum
  • Standards - EN200 and/or WRc/NSF 
  • Outlet: 15 mm (1/2" BSP) Male Thread
5 Year guarantee

Flow Rates

0.1 Bar - 8 l/m
0.5 Bar - 19 l/m
1.0 Bar - 28 l/m
2.0 Bar - 34 l/m
3.0 Bar - 42 l/m

Product Overview

Dimension image

10 Questions

what is the diameter of the central boss?

Asked by alex

ANSWER

Sandra replied on 22nd December 2016

Hello, this is 70mm and the pipe centres are 150mm. Many thanks

Hi Team - can the inlet pipes be rotated 90 degrees so that they are vertical to accomodate surface delivery piping rather than through the wall?

Asked by Happy

ANSWER

craig replied on 14th July 2014

Hi, yes these can be turned to face upwards. Howver care must be taken not to scratch the valve. Thanks!

I am looking to replace an Old MIRA shower valve, Can the inlets be turned upwards but slightly angled of 90 deg. I also assume the the fixing is through the back plate onto a wall (Tiles) Jim

Asked by Jim Farley

ANSWER

craig replied on 7th August 2014

Hi Jim, the joints can be rotated but not angled. Hope this helps.

I am purchasing to replace an exact copy of this product but have to comply with existing plumbing which has 140mm centers for the pipes out of the tiled wall. Can this product reduce from the 150mm dimensions down to 140mm

Asked by Raymond Tyminski

ANSWER

sue replied on 27th February 2014

Hi Raymond, no unfortunately this twin exposed shower valve is not adjustable. The standard size seems to be 150mm. Sorry we couldn't help more, if you have any further questions, please let me know.

In metric are the two inlets and outlet 15mm?

Asked by Jonny

ANSWER

sue replied on 2nd April 2014

Hi, yes the Ultra Traditional Twin Exposed Shower Valve has an inlet and an outlet that are each 15mm. Thanks.

Do you sell spares. as my top flow control handle is leaking,

Asked by ann

ANSWER

Joe replied on 29th January 2014

If you require spares for the Ultra Twin Exposed Shower Valve, please call the manufacturer on 01282 436934 and they will be able to further assist you. Thanks.

Does this have a 'no return' valve? Can it take half a bar of pressure or does it need more?

Asked by Leslie

ANSWER

Joe replied on 4th November 2013

Hi leslie, we normally recommend a minimum of 0.1 bar for these products. Not too sure on the specs of the valve you've mentioned, but please get in touch if you have any further questions

Do I need another bracket?

Asked by Didi

ANSWER

Louise replied on 8th October 2013

Im not quite sure of your question, please contact our support team so we can help you out with this 0800 862 0878

Can this valve be fitted to inlets with 170mm between centres? Or could you suggest an alternative value?Thanks

Asked by Stevie

ANSWER

Louise replied on 1st October 2013

Sorry, but the centres are fixed at 150mm. Please contact us to discuss your options 0800 862 0878 

Will this unit fit onto a standard mixer shower backplate?

Asked by Steve

ANSWER

Joe replied on 9th August 2013

Hi Steve. This traditional shower valve is designed to fit standard inlet pipe spacing, so can easily replace an existing valve. This spacing is 150mm from pipe centre to pipe centre. Hope this helps

Showing 10 of 10 questions

Delivery Costs

Tell us where you are so we can calculate your delivery

Delivery FAQs

Larger pallet couriers will contact you on the day to let you know a rough time for delivery, due to the size and cost, a signature is always required.
We always suggest someone is home to accept the delivery, as missing your delivery may result in a re-delivery fee being charged

If the courier has left you a calling card you may contact them directly to rearrange delivery for a more convenient time. If you have not received a calling card, we will be able to assist you in re-booking delivery. Please use the live chat function to speak directly to a member of the team, or alternatively email us at info@victorianplumbing.co.uk.

Orders can be updated and modified up until the picking process begins. To amend your order please get in touch via Live Chat or by emailing us at info@victorianplumbing.co.uk.

If you would like to upgrade your delivery or arrange to split your delivery, you can do this via the help centre.
Please note, once your order has begun to be picked at our warehouse, you will not be able to make any further additions.

Yes, please get in touch with the team either via live chat or at info@victorianplumbing.co.uk to arrange a pre-order.

If you are ordering other in-stock items alongside this, please be aware your shipment will be held until all items are ready to be dispatched. If you would like to arrange a split delivery, please let the team know as soon as your order is confirmed.

We can only deliver and accept signatures from the delivery address as per the order.

Larger pallet couriers will contact you on the day to let you know a rough time for delivery, due to the size and cost, a signature is always required. Small parcel couriers may leave these with a neighbour if no one is home to accept delivery and leave an appropriate calling card if so. 

We always suggest someone is home to accept the delivery, as missing your delivery may result in a re-delivery fee being charged.

Returns

For further information on our returns process, please check out our Returns Information Page.

International Delivery

Available - delivery costs will be calculated at the checkout.

Please note:

  • Out-of-stock items will despatch on a similar timescale once in stock.
  • You will be advised of any changes in the expected in-stock date.
  • The delivery timescale of an order is dependent on the size of the largest item in the order, relating to the guide above.We strongly advise that you do not book plumbers until your goods have arrived and have been checked, we are not liable for any plumbers costs, consequential loss or compensation in any way.

4.9

19 customer reviews

5 stars

17

4 stars

2

3 stars

0

2 stars

0

1 stars

0

2nd February 2023

Review From Trustpilot

It was bought as a replacement for the same part, slight changes but fit well and easy to install.

MRTERENCESPINKS- verified purchaser

8th January 2022

10 years of faultless operation.

After 10 years of faultless operation the mixer valve was broken by a family member. Replacing the whole shower unit was deemed a best value practice rather than changing just the insert. I would highly recommend this shower.

Scott Burton from Robin Hood, Wakefield

4th March 2019

Replacement Shower Valve

Fitted by my plumber quickly. Looks good, works well and cheapest on the market that I could find.Very pleased. Thank you.

David from Sandown - verified purchaser

31st March 2014

Just what we needed

It will replace our existing valve.

Nicholas Sklar from LEIGHTON BUZZARD - verified purchaser

12th March 2014

AG 302 Shower Valve

An excellent product. It only failed after 10 years of hard use. We enquired about it but were told that it was no longer made and supplying manufacturers have changed. This was confusing as it appears the AG302 is still available. We went ahead and sourced one.

Charles Cawley from Leominster

4th September 2013

Shower Valve Review

I have had no problems with this product and it arrived on time.

Rosanna Marshall-McCrae from GLASGOW - verified purchaser

27th July 2013

Ultra Traditional Twin Exposed Thermostatic Shower Valve - Chrome - AG302

I am very happy with the product and delivery. Would definitely use this company again and will recommend to friends.

Jeffrey Greene from ILFORD - verified purchaser

2nd June 2013

Ag302 shower valve

This is excellent value for money I had bristan valves previously and this one is as good for a fraction of the price the blanking plates are now solid chrome not plastic as a previous purchaser had mentioned.... Highly recommended.

david popay from MORPETH - verified purchaser

12th April 2013

5* shower

good value for money fast delivery replaced the non thermostatic valve that went hot and cold this one keeps the same temp all the time its class recommend.

derek hall from CORBY - verified purchaser

3rd April 2013

Value for Money

I had been looking for a 'traditional look' appliance that would fit in with my bathroom suite. The original appliance I had intalled looked good but had not lasted well and since it had been quite expensive when purchased originally, I was somewhat wary of repeating the disappointment. The Ultra was less than half the price and has been functioning very well (at least twice daily) for over a year now without any of the nagging problems attendant on my old valve assembly. The only small criticism (and not a serious one I may add) is the the disc flanges which disguise the pipe entry through the wall are made of silvered plastic rather than metal like the rest of the unity and are susceptible to damage during assembly. But considering the whole unit costs less than £100 I am not complaining - the rest of the asssmbly is completely robust. So, highly recommended as a good-looking traditional valve assembly that offers very good value for money.

David Dalton-Leggett from YEOVIL - verified purchaser

Showing 10 of 19 reviews

What finance packages do you offer?

Interest Free Credit

Take advantage of our great credit deals. Spread the cost with 6, 12 and 24-month plans at a fantastic 0% APR. For orders under £500, no deposit is required. Orders over £500 require a 10% deposit.

Finance Calculator

Simply enter the total amount you want to spend. Then, select your repayment period. For orders under £500, no deposit is required. Orders over £500 require a 10% deposit.

What is your budget?

Enter a value between £250 - £10,000

£

Choose how many months you wish to pay

  • 6
  • 12
  • 24

Interest Free 0% APR

*Finance available on all orders over £250. Prices given representative as part of larger order.

Results

Total amount to spend£250.00

Deposit£0.00

Amount of Credit£250.00

Term6months

Monthly payments£41.68

Typical APR0%

Total amount payable (inc. deposit)£250.00

All Loans are subject to status and terms.

*Finance available on all orders over £250. Prices given representative as part of larger order.

For further information on our finance partnership, please visit our finance page.

Current Item

Victorian Plumbing

Nuie Traditional Twin Exposed Thermostatic Shower Valve - Chrome

£159.95

In Stock