Sanitary Macerator Waste Pump System (3 Inlets)

Sanitary Macerator Waste Pump System (3 Inlets)

This Sanitary Macerator Waste Pump System is equipped with a sewage pump and three inlets. It’s designed for efficient transportation of your sewage and wastewater. This versatile system can handle waste from one toilet and two other sanitary fixtures as needed.

The motor comes with an integrated stainless-steel shredder, offering powerful maceration and impressively low power consumption. This ingenious device can operate even in the hardest-to-reach parts of your house, such as the attic or basement. Additionally, this versatile macerator sewage pump can also process waste from dishwashers and washing machines.

This system is suitable for toilets, basins, showers or baths.

Product Specifications:

• Dimensions: Height: 285mm, Width: 398mm, Depth: 202mm
• Motor: 600W (Size: D125mm)
• Horizontal Discharge: 100M
• Electrical Supply: 220~240V/50Hz
• Vertical Discharge: 10M
• Max Flow Rate: 240L/Min
• Inlet Pipe: 2x40mm + 1x100mm
• Max Water Temperature: 90°C (for 30 minutes)
• Outlet Pipe: 40mm
• Switch: Air-switch dB 45~55dB(A)
• Motor RPM: 2800RMP
• IP Rating: IPX4
• Manual Switch: Can be forced start should air-switch fails
• Inlets:
• Toilet Inlet: Ø100mm
• 2 x Sanitary Fixture Inlets: Ø40mm
• Outlets:
• 2 x Discharge Pipe Outlets: Ø40mm

Please note that all images provided are for illustration purposes only, and the measurements are approximate.

Components Included:

2 x Check Valves
1 x 90 x 120 Jubilee Clip
7 x 32 x 50 Jubilee Clips
1 x Large Blanking Plug
2 x Small Blanking Plugs

Important Note:
Proper installation of the non-return valve is crucial.
Warranty adherence to the manufacturer’s guidelines is essential.

Guarantee: 1 year.

This system ensures efficient waste management without the need for extensive floor excavation, making it an excellent choice for various applications.

Essential Care of Your Unit:

To protect your macerator from both lime scale deposits and waste residue we recommend that you use a suitable Cleanser / Descaler. First, Disconnect the macerator power supply and pour an amount of cleanser into the pan. Leave it to stand for 1-2 hours before reconnecting the macerator power supply. Finally, Rinse by operating the flushing system twice.

It is recommended to carry out this operation Once every 3 months on average. However, the frequency may need to be changed depending on the hardness of the water and usage.