EXTRA 10% OFF BATHS WITH CODE: BATH10
*Free delivery on orders over £499
Dimensions
Genesis Stainless Steel Tile In Step Edge
Part No:Please select option
£41.15
Low Stock
Delivery OptionsAdd postcode to view all options
Delivery & Returns FAQs
Product Information
Genesis Stainless Steel Tile In Step Edge
Genesis NSS is a contemporary design Stainless Steel Step edge profile with a unique serrated grip edge. Providing edge protection to the floor covering and highlighting the step edge. The flange sits underneath the tile and the face section covers the exposed edge of the riser tile and prevents water ingress into the joint gap.
Product Details
Images are for illustrative purposes
Installation:
1. Check the fit of the nosing and ensure the profile is the correct height and width for the step and floor covering.
2. Install the floor covering on the riser.
3. Place the nosing firmly on the step and if necessary mark the floor.
4. Drill and Plug the floor if Mechanically fixing.
5. Apply the adhesive using a suitable notched trowel to the manufacturers recommendations.
6. Bed the profile into the adhesive ensuring that the adhesive comes through all the flange holes, spread the adhesive over the top of the flange before installing tiles.
7. A grout gap is not required however if visible ensure that grout is compressed firmly within the gap.
Genesis NSS is a contemporary design Stainless Steel Step edge profile with a unique serrated grip edge. Providing edge protection to the floor covering and highlighting the step edge. The flange sits underneath the tile and the face section covers the exposed edge of the riser tile and prevents water ingress into the joint gap.
Product Details
- Material: Grade 304 Stainless Steel
- Finish: Polished
- Depth: 10mm / 12mm
- Length: 2.5m
- Suitable for external use
Images are for illustrative purposes
Installation:
1. Check the fit of the nosing and ensure the profile is the correct height and width for the step and floor covering.
2. Install the floor covering on the riser.
3. Place the nosing firmly on the step and if necessary mark the floor.
4. Drill and Plug the floor if Mechanically fixing.
5. Apply the adhesive using a suitable notched trowel to the manufacturers recommendations.
6. Bed the profile into the adhesive ensuring that the adhesive comes through all the flange holes, spread the adhesive over the top of the flange before installing tiles.
7. A grout gap is not required however if visible ensure that grout is compressed firmly within the gap.
No reviews about this product yet
How We Gather Reviews
No questions about this product yet
Current Item
Genesis Stainless Steel Tile In Step Edge
£41.15
Low Stock