Grab up to 60% off in Our Summer Sale!
Flash Offer: Free Delivery On Orders Over £99. Ends:
ENDS TONIGHT:
Genesis Matt Silver Aluminium Tile-In Bullnose Trim
Part No:Please select from the options below
£31.78
The stock status is Available Delivery Est: 2 - 7 days
Available
Delivery Est: 2 - 7 days
Height:
12 mm
Product Information
Genesis Matt Silver Aluminium Tile-In Bullnose Trim
Genesis NAT Tile-In Bullnose Trim is an attractive slender profile designed to enhance the step installation and protect the edge of the floor covering from impact damage. It also provides a little grip on the edge of the step to prevent slipping. The flange sits underneath flat tile and also forms a locking locator for the riser tile. The neat rounded face highlights the edge of the step as well as protecting it.
Product Details
Images are for illustrative purposes
Installation:
1. Check the fit of the nosing and ensure the profile is the correct height and width for the step and floor covering.
2. Install the floor covering on the riser.
3. Place the nosing firmly on the step and if necessary mark the floor.
4. Drill and Plug the floor if Mechanically fixing.
5. Apply the adhesive using a suitable notched trowel to the manufacturers recommendations.
6. Bed the profile into the adhesive ensuring that the adhesive comes through all the flange holes, spread the adhesive over the top of the flange before installing tiles.
7. A grout gap is not required however if visible ensure that grout is compressed firmly within the gap.
Genesis NAT Tile-In Bullnose Trim is an attractive slender profile designed to enhance the step installation and protect the edge of the floor covering from impact damage. It also provides a little grip on the edge of the step to prevent slipping. The flange sits underneath flat tile and also forms a locking locator for the riser tile. The neat rounded face highlights the edge of the step as well as protecting it.
Product Details
- Material: Aluminium
- Finish: Matt Silver
- Height: 10mm / 12mm
- Length: 2.6m
Images are for illustrative purposes
Installation:
1. Check the fit of the nosing and ensure the profile is the correct height and width for the step and floor covering.
2. Install the floor covering on the riser.
3. Place the nosing firmly on the step and if necessary mark the floor.
4. Drill and Plug the floor if Mechanically fixing.
5. Apply the adhesive using a suitable notched trowel to the manufacturers recommendations.
6. Bed the profile into the adhesive ensuring that the adhesive comes through all the flange holes, spread the adhesive over the top of the flange before installing tiles.
7. A grout gap is not required however if visible ensure that grout is compressed firmly within the gap.
No reviews about this product yet
How We Gather Reviews
No questions about this product yet
Current Item
Genesis Matt Silver Aluminium Tile-In Bullnose Trim
£31.78
Available