Grab Up To 60% Off In Our February Sale!
Valentine's Deal + Extra 10% Off Taps With TAPS10. Ends:
Genesis Matt Silver Aluminium Formable 2 in 1 Tile Trim
Part No:NFA125.81
£31.78
Available Estimated delivery time: 2 - 7 days
Notify me
Configure Your Product
Colour:
Matt SilverDelivery OptionsAdd postcode to view all options
Delivery & Returns FAQs
Product Information
Genesis Matt Silver Aluminium Formable 2 in 1 Tile Trim - NFA125.81
Genesis NFA is an innovative reversible formable Aluminium profile for step edges, the profile can be fitted either way around thus making it suitable for 10mm or 12mm deep floor coverings. The flange is specially designed to provide a straight edge to the step but can also be easily formed on site by hand to create a curved step edge.
Product Details
Images are for illustrative purposes
Installation:
1. Check the fit of the nosing and ensure the profile is the correct height and width for the step and floor covering.
2. Install the floor covering on the riser.
3. Place the nosing firmly on the step and if necessary mark the floor.
4. Drill and Plug the floor if Mechanically fixing.
5. Apply the adhesive using a suitable notched trowel to the manufacturers recommendations.
6. Bed the profile into the adhesive ensuring that the adhesive comes through all the flange holes, spread the adhesive over the top of the flange before installing tiles.
7. A grout gap is not required however if visible ensure that grout is compressed firmly within the gap.
Genesis NFA is an innovative reversible formable Aluminium profile for step edges, the profile can be fitted either way around thus making it suitable for 10mm or 12mm deep floor coverings. The flange is specially designed to provide a straight edge to the step but can also be easily formed on site by hand to create a curved step edge.
Product Details
- Material: Aluminium
- Finish: Matt Silver
- Height: 3 x 10/12mm
- Length: 2.6m
- Formable Tile Trim
Images are for illustrative purposes
Installation:
1. Check the fit of the nosing and ensure the profile is the correct height and width for the step and floor covering.
2. Install the floor covering on the riser.
3. Place the nosing firmly on the step and if necessary mark the floor.
4. Drill and Plug the floor if Mechanically fixing.
5. Apply the adhesive using a suitable notched trowel to the manufacturers recommendations.
6. Bed the profile into the adhesive ensuring that the adhesive comes through all the flange holes, spread the adhesive over the top of the flange before installing tiles.
7. A grout gap is not required however if visible ensure that grout is compressed firmly within the gap.
No reviews about this product yet
How We Gather Reviews
No questions about this product yet
Current Item
Genesis Matt Silver Aluminium Formable 2 in 1 Tile Trim
£31.78
Available