Grab up to 60% off in Our May Price Drop!
Plus an Extra 10% off Taps With Code TAPS10. Code Ends:
Genesis 10mm Stainless Steel Formable Tile Trim - Polished Finish
Part No:ESF100.84
£31.78
The stock status is Low Stock
Low Stock
Finish:
PolishedHeight:
10 mm
Product Information
Genesis 10mm Stainless Steel Formable Tile Trim - Polished Finish - ESF100.84
Genesis Stainless Steel Formable Tile Trims have a specially punched flange which allows the profile to be formed by hand allowing curves to be created. All are supplied with a transparent protective film offering protection during transport and storage, simply peel off after installation.
Product Details
Installation:
1. Select profile according to tile thickness.
2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
3. Press the perforated anchoring leg of the ESS / ESF, into the tile adhesive and align, mechanical fix if required
4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile (the profile should not be higher than the tiled surface, but rather up to approx. 1 mm lower).
6. Fill the joint completely with grout.
Genesis Stainless Steel Formable Tile Trims have a specially punched flange which allows the profile to be formed by hand allowing curves to be created. All are supplied with a transparent protective film offering protection during transport and storage, simply peel off after installation.
Product Details
- Material: Stainless Steel
- Finish: Polished Finish
- Length: 2.5m
- Height: 10mm
Installation:
1. Select profile according to tile thickness.
2. Trowel tile adhesive over the area that forms the perimeter of the tiled covering.
3. Press the perforated anchoring leg of the ESS / ESF, into the tile adhesive and align, mechanical fix if required
4. Trowel additional adhesive over the perforated anchoring leg to ensure full coverage.
5. Solidly embed the tiles so that the tiled surface is flush with the top of the profile (the profile should not be higher than the tiled surface, but rather up to approx. 1 mm lower).
6. Fill the joint completely with grout.
No reviews about this product yet
How We Gather Reviews
No questions about this product yet
Current Item
Genesis 10mm Stainless Steel Formable Tile Trim - Polished Finish
£31.78
Low Stock