LTP Porcelain Tile Enhancer

LTP Porcelain Tile Enhancer 

Transform your porcelain paving with LTP Self-Shine Enhancer – a low-maintenance, film-forming surface sealer designed to enhance and protect both indoor and outdoor porcelain surfaces. This advanced formula leaves a subtle ‘just washed’ sheen, while offering long-lasting resistance to wear and stains.

Perfect for patios, pathways, kitchens, and bathrooms, it simplifies cleaning and helps maintain a fresh, polished look with minimal effort.

Key Features:

• Enhances and embellishes porcelain surfaces
• Leaves a clean, low-sheen finish
• Highly resistant to stains and surface wear
• Facilitates easy maintenance and cleaning
• Suitable for both new and existing installations

Coverage:

• Size: 1L, 5L plastic tubs
• Approx. 30–40m² per litre (one coat), depending on surface texture

Application Instructions:

• New surfaces: Ensure clean, dry, and free from cement/grout residues (use LTP Cement, Grout & Salt Remover).
• Existing surfaces: Clean with LTP Grimex Intensive Cleaner, rinse thoroughly, and allow to dry for 24 hours.

Application:

• Apply to clean, dry surface using a foam roller, sealant pad, or brush.
• Pour into a separate container and apply without rubbing to form a thin, even film.
• Allow to dry for 1 hour. For a more enhanced finish, apply up to 4 coats, alternating direction.
• Avoid over-application to prevent build-up or reduced slip resistance.
• Full hardness achieved after 3 days.
• Temperature Range: Apply between 5°C – 25°C

Aftercare:

• Sweep regularly and mop with LTP Porcelain Floor Tile Cleaner.
• Avoid steam cleaners, jet washers, and strong detergents.
• For renovation (every 2–3 years), strip with LTP Solvex before reapplying.

Storage & Safety:

• Store in a cool, dry, frost-free environment
• Shelf life: Up to 2 years (unopened)
• Keep out of reach of children
• In case of contact with eyes, rinse thoroughly and seek medical advice if irritation persists